Ikan MR-7 Operating Instructions Manual page 30

▪ REC Auto Mode
Slave Record for SDI only
Select On to record (automatically) When timecode starts and stops.
Select Off to record regardless of timecode existence.
NOTE: This feature is not available when using analog or HDMI inputs.
▪ REC Date & Time Set
Sets the date and time for recording.
* The date and time may be lost if the timer battery runs out of charge. To charge the
timer battery fully, keep the monitor power on for more than an hour. When the battery
is dead, call us for service and replace with a new one. Attempting to replace the battery
could harm yourself and the monitor.
30/51