Advertisement
4
High Speed Transducer
This accessory works with a number of Humminbird® fishfinder products. Some products
may require disassembly of the fishfinder mounting bracket in order to connect the cable.
Refer to your operations manual and/or control head installation sheet for the correct
procedure for routing cables and cable connections.
If you find that the cable is too short for your application, extension cables are available
at a reasonable cost which can extend the transducer cable up to 50' (15 m). Contact the
Humminbird® Customer Resource Center at 1-800-633-1468 or visit our website at
www.humminbird.com.
Maintenance
If your boat remains in the water for long periods of time, algae and other marine growth
can reduce the effectiveness of the transducer. Periodically clean the face of the
transducer with liquid detergent. Pivoting the transducer up in the bracket may allow
better access for inspection or cleaning.
In some cases it may take some time to wet the transducer when returned to the water.
Small air bubbles can cling to the surface of the transducer and can interfere with proper
operation. These bubbles will dissipate with time, or you may wipe the face of the
transducer with your fingers after the transducer is in the water.
Customer Support
Your Humminbird® accessory is designed for trouble-free operation and is backed by the
same one-year warranty as our fishfinders, VHF Marine-band radios, and GPS Navigation
equipment. Refer to your Humminbird® product operations manual for the specific
details of this warranty. If you have any questions, contact the Humminbird® Customer
Resource Center at 1-800-633-1468 or visit our website at www.humminbird.com.
Throughout the US and Canada, our hours are Monday through Friday, 8:00 a.m. to
4:30 p.m., Central Standard Time.
Humminbird
678 Humminbird Lane
Eufaula, AL 36027
www.humminbird.com
530506-2_A
Advertisement
