Display Assembly - HP Pavilion g7 Maintenance And Service Manual

Reverse this procedure to install the processor.

Display assembly

NOTE: The display assembly spare part kit includes webcam, two microphones, and wireless
antenna transceivers and cables).
Description
17.3-in, HD, LED, BrightView display assembly (includes webcam, two microphones, and wireless antenna transceivers
and cables)
In butter gold finish
In charcoal gray finish
In luminous rose finish
In ocean drive finish
In Pacific blue finish
In pearl pink finish
In pewter finish
In Sonoma red finish
In sweet purple finish
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
●
Optical drive (see
●
Hard drive (see
●
WLAN module (see
●
Keyboard (see
●
Top cover (see
Battery on page 47), and then remove the following components:
Optical drive on page
Hard drive on page 51)
WLAN module on page
Keyboard on page 57)
Top cover on page 61)
49)
55)
Component replacement procedures
Spare part number
640223-001
640226-001
640225-001
640224-001
640221-001
640228-001
640227-001
640220-001
640222-001
93