Controls And Adjustments; A) Default S4 Dip Switch Settings; B) Harvest Timer (S4 Dip Switch 1 & 2) - Hoshizaki KM-515MAH Service Manual

3. Controls and Adjustments

Dip switches are factory set. Failure to maintain factory settings may adversely
affect performance and warranty coverage. For more information, contact
HOSHIZAKI Technical Support at 1-800-233-1940.

a) Default S4 Dip Switch Settings

The dip switches are factory-adjusted to the following positions:
Dip Switch No.
KM-515MAH
KM-515MWH OFF OFF OFF OFF OFF OFF OFF OFF ON OFF
KM-515MRH
b) Harvest Timer (S4 dip switch 1 & 2)
The harvest timer is only active during the initial harvest cycle. Every cycle thereafter the
pump-out timer's harvest timer (S4 dip switch 3 & 4, T2) acts in place of the harvest timer
on KM‑515M_H models, as the pump out occurs every cycle. See "II.C.3.c) Pump Out
Timer (S4 dip switch 3 & 4)."
CAUTION
1 2 3 4
OFF OFF OFF OFF OFF OFF OFF OFF ON OFF
OFF OFF OFF OFF OFF OFF OFF OFF ON OFF
Freeze Timer (9 & 10)
Normally off (7 & 8)
Pump-Out Frequency Control (5 & 6)
Do Not Adjust
Pump-Out Timer (3 & 4)
Harvest Timer (1 & 2)
Dip Switch Setting
No. 1 No. 2
OFF OFF
ON OFF
OFF ON
ON ON
20
5 6 7 8 9
Time
(seconds)
60
90
120
180
10