Red Hat 8.1 Configuration And Command Reference page 78

78
Chapter 2. Core Server Configuration Reference
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.13.7. nssnmpmasterport
T he nssnmpmasterport attribute was deprecated with the introduction of net-snmp. T he attribute still
appears in dse.ldif but without a default value.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.14 . SNMP Statistic Attributes
T able 2.8, "SNMP Statistic Attributes"
LDAP and SNMP clients. Unless otherwise noted, the value for the given attribute is the number of
requests received by the server or results returned by the server since startup. Some of these attributes
are not used by or are not applicable to the Directory Server but are still required to be present by SNMP
clients.
If the nsslapd-counters attribute in cn=config is set to on (the default setting), then all of the
counters kept by the Directory Server instance increment using 64-bit integers, even on 32-bit machines
or with a 32-bit version of Directory Server. All of the SNMP statistics attributes use the 64-bit integers, if
it is configured.
NOTE
T he nsslapd-counters attribute enables 64-bit integers for these specific database and server
counters. T he counters which use 64-bit integers are not configurable; 64-bit integers are either
enabled for all the allowed counters or disabled for all allowed counters.
Description
cn=SNMP, cn=config
machine hostname or localhost
<blank>
DirectoryString
nssnmpmasterhost: localhost
Description
cn=SNMP, cn=config
Operating system dependent port number. See
the operating system documentation for further
information.
<blank>
Integer
nssnmpmasterport: 199
contains read-only attributes which list the statistics available for