Red Hat 8.1 Configuration And Command Reference page 29

T his attribute sets whether change sequence numbers (CSNs), when available, are to be logged in the
access log. By default, CSN logging is turned on.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.4 1. nsslapd-ds4 -compatible-schema
Makes the schema in cn=schem a compatible with 4.x versions of Directory Server.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.4 2. nsslapd-enquote-sup-oc (Enable Superior Object Class Enquoting)
T his attribute is deprecated and will be removed in a future version of Directory Server.
T his attribute controls whether quoting in the objectclass attributes contained in the cn=schem a
entry conforms to the quoting specified by Internet draft RFC 2252. By default, the Directory Server
conforms to RFC 2252, which indicates that this value should not be quoted. Only very old clients need
this value set to on, so leave it off.
T urning this attribute on or off does not affect Directory Server Console.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.1.4 3. nsslapd-errorlog (Error Log)
T his attribute sets the path and filename of the log used to record error messages generated by the
Directory Server. T hese messages can describe error conditions, but more often they contain
informative conditions, such as:
Server startup and shutdown times.
T he port number that the server uses.
T his log contains differing amounts of information depending on the current setting of the Log Level
attribute. See Section 2.3.1.44, "nsslapd-errorlog-level (Error Log Level)"
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
For error logging to be enabled, this attribute must have a valid path and filename, and the nsslapd-
errorlog-logging-enabled configuration attribute must be switched to on. T he table lists the four
possible combinations of values for these two configuration attributes and their outcome in terms of
disabling or enabling of error logging.
Red Hat D irectory Server 8.1 Configuration and Command Reference
Description
cn=config
on | off
on
DirectoryString
nsslapd-csnlogging: on
Description
cn=config
on | off
off
DirectoryString
nsslapd-ds4-compatible-schema: off
Description
cn=config
on | off
off
DirectoryString
nsslapd-enquote-sup-oc: off
for more information.
Description
cn=config
Any valid filename
/var/log/dirsrv/slapd-instance_name/errors
DirectoryString
nsslapd-errorlog:
/var/log/dirsrv/slapd-instance_name/errors
29