Red Hat 8.1 Configuration And Command Reference page 67

Default Value
Syntax
Example
2.3.8.2. description
Free form text description of the replication agreement. T his attribute can be modified.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.3. nsDS5ReplicaBindDN
T his attribute sets the DN to use when binding to the consumer during replication. T he value of this
attribute must be the same as the one in cn=replica on the consumer replica. T his may be empty if
certificate-based authentication is used, in which case the DN used is the subject DN of the certificate,
and the consumer must have appropriate client certificate mapping enabled. T his can also be modified.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.4 . nsDS5ReplicaBindMethod
T his attribute sets the method for the server to use to bind to the consumer server.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
2.3.8.5. nsDS5ReplicaBusyWaitT ime
T his attribute sets the amount of time in seconds a supplier should wait after a consumer sends back a
busy response before making another attempt to acquire access. T he default value is three (3)
seconds. If the attribute is set to a negative value, Directory Server sends the client a message and an
LDAP_UNWILLING_T O_PERFORM error code.
T he nsDS5ReplicaBusyWaitTime attribute works in conjunction with the
nsDS5ReplicaSessionPauseTime attribute. T he two attributes are designed so that the
nsDS5ReplicaSessionPauseTime interval is always at least one second longer than the interval
specified for nsDS5ReplicaBusyWaitTime. T he longer interval gives waiting suppliers a better chance
to gain consumer access before the previous supplier can re-access the consumer.
Set the nsDS5ReplicaBusyWaitTime attribute at any time by using changetype:m odify with the
replace operation. T he change takes effect for the next update session if one is already in progress.
Parameter
Entry DN
Valid Values
Red Hat D irectory Server 8.1 Configuration and Command Reference
DirectoryString
cn: MasterAtoMasterB
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Any string
DirectoryString
description: Replication Agreement between
Server A and Server B.
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Any valid DN (can be empty if client certificates
are used)
DirectoryString
nsDS5ReplicaBindDN: cn=replication manager,
cn=config
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
SIMPLE | SSLCLIENT AUT H
T he SIMPLE bind method requires a DN and
password.
SIMPLE
DirectoryString
nsDS5ReplicaBindMethod: SIMPLE
Description
cn=ReplicationAgreementName, cn=replica,
cn=suffixDN, cn=mapping tree, cn=config
Any valid integer
67