Red Hat 8.1 Configuration And Command Reference page 143

Contrary to what the name suggests, this attribute does not specify the number of times a database link
retries to bind with the remote server but the number of times it tries to bind with the remote server. A
value of 1 here indicates that the database link only attempts to bind once.
NOTE
Retries only occur for connection failures and not for other types of errors, such as invalid bind
DNs or bad passwords.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
3.5.2.4 . nsBindT imeout
T his attribute shows the amount of time before the bind attempt times out. T here is no real valid range
for this attribute, except reasonable patience limits.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
3.5.2.5. nsCheckLocalACI
Reserved for advanced use only. T his attribute controls whether ACIs are evaluated on the database
link as well as the remote data server. Changes to this attribute only take effect once the server has
been restarted.
Parameter
Entry DN
Valid Values
Default Value
Syntax
Example
3.5.2.6. nsConcurrentBindLimit
T his attribute shows the maximum number of concurrent bind operations per T CP connection.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Example
3.5.2.7. nsConcurrentOperationsLimit
T his attribute specifies the maximum number of concurrent operations allowed.
Parameter
Entry DN
Valid Range
Default Value
Syntax
Red Hat D irectory Server 8.1 Configuration and Command Reference
Description
cn=default instance config, cn=chaining
database, cn=plugins, cn=config
0 to 5
3
Integer
nsBindRetryLimit: 3
Description
cn=default instance config, cn=chaining
database, cn=plugins, cn=config
0 to 60 seconds
15
Integer
nsBindT imeout: 15
Description
cn=default instance config, cn=chaining
database, cn=plugins, cn=config
on | off
off
DirectoryString
nsCheckLocalACI: on
Description
cn=default instance config, cn=chaining
database, cn=plugins, cn=config
1 to 25 binds
10
Integer
nsConcurrentBindLimit: 10
Description
cn=default instance config, cn=chaining
database, cn=plugins, cn=config
1 to 50 operations
2
Integer
14 3