Advertisement
2
Route the wire from the chosen opener
powerhead (only one is required to be physically wired to
the Console, for a group of up to 3 openers*) to the desired
mounting location for the Console, being sure to keep it
clear of any moving parts or equipment.
Be sure to fasten it securely in place. If using insulated
staples, be careful not to pinch or sever the wire. Make
the staples only snug enough to hold the wire .
3
Mount the Console using the screws provided:
A Unlatch and remove mounting backet.
MOUNTING
BRACKET
B Remove the screws held in the back of
the Console.
*
In order to operate 2 or 3 garage door openers, you
only need one IWC that is wired to the opener of your
choice for power. (However, each opener MUST have its
own Network Adapter.)
LATCH
5
Advertisement
