Installing Handle - Hobart HSW 15 Owner's Manual

4-4. Installing Handle

2
1
Tools Needed:
7/16, 3/8 in
Y Turn off and unplug welder.
1 Wodden Handle
2 Handle Bolt
3 Brackets (15, 15T Models Only)
1
2
3
1
2
Install handle onto the spot welder as shown
above. For 25 and 25T Models, install han-
dle onto either side as desired for either right-
hand or left-hand use.
Return To Table Of Contents
All HSW 15 Models
All HSW 25 Models
Ref. ST-802 056-A
OM-715 Page 9