Boot Up Floppy Seek; Password Check; Full Screen Logo Show; Init Display First - Fujitsu GA-8SGXL P4 Titan DDR User Manual

Boot Up Floppy Seek

During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type
is 40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
Enabled BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are
all 80tracks.
Disabled BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360K.
(Default value)

Password Check

Setup Ask password when enter setup. (Default value)
System Ask password when system boot.
CPU Hyper-Threading*
Disabled Disable CPU Hyper Threading.
Enabled Enables CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported.
(Default value)

Full Screen LOGO Show

This feature allows you to show the company logo on the bootup screen.
Disabled Shows the POST messages at boot.
Enabled Shows the still image(LOGO) on the full screen at boot. (Default value)

Init Display First

PCI Set Init Display First to PCI.
AGP Set Init Display First to AGP. (Default value)
* This item will not be shown if you are using a CPU that doesn't support the "Hyper Threading Technology".
GA-8SGXL Motherboard - 28 -