Swing Operation - Fujitsu Inverter Halcyon ASU24CL1 Operating Manual

SWING OPERATION

Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button (Fig. 6 T).
The SWING Display (Fig. 7 b) will light.
Each time the SWING button is pressed, the swing operation will change in the
following order.
Up/down swing operation
Swing operation stops
To stop SWING Operation
Press the SWING button and select STOP.
Airflow direction will return to the setting before swing was begun.
About Swing Operation
G Up/down swing: Swing operation begins using the
following range according to the current airflow direc-
tion.
Airflow direction is 1–4 (for cooling, dry).
With the upper airflow-direction louver in the
horizontal position, the lower airflow-direction
louver moves (swings) to direct airflow to a wide
area.
G Left/right swing: The airflow-direction louvers move
(swing) in the left/right airflow direction.
Left/right swing operation
Up/down/left/right swing operation
G Up/down/left/right swing: The airflow-direction louvers
G The SWING operation may stop temporarily when the
G If the SET button(Vertical) is pressed during the up/
move (swing) in both the up/down and left/right airflow
directions.
air conditioner's fan is not operating, or when operating
at very low speeds.
down swing operation, the up/down swing operation
will stop and if the SET button(Horizontal) is pressed
during the left/right swing operation, the left/right
swing operation will stop.
En-10