Ableton Live - Avid Technology EUCON Application Setup Manual

Ableton Live

Before proceeding, you must already have completed the steps described in "Setting Up EuCon for Mackie Control" on page 35.
To finish the configuration:
Choose Live->Preferences.
1
The Preferences dialog opens.
Click the MIDI tab on the left.
2
Select Mackie Control or Mackie Control Classic from the Control Surface column. We recommend Mackie Control.
3
Live MIDI Preferences dialog
Select the desired MIDI emulation ports from the Input and Output columns for the Mackie Control Surface.
4
Repeat steps 3 and 5 for each additional Artist media controller in your network.
5
The MIDI ports selected here should match those specified in the Euphonix Preferences Pane.
Close the Preferences dialog.
6
Your Artist media controller should now be controlling your application. If not:
• Make sure Live is the front-most application (i.e., the one receiving keystrokes and mouse clicks). The Artist media control-
lers control only the front-most application.
• Check that all steps in "Setting Up EuCon for Mackie Control" on page 35 and in this section have been performed correctly,
and reboot your Mac.
• Make sure the Euphonix MIDI device in Applications->Utilities->Audio MIDI Setup is blue (active) and not gray (inactive).
If inactive, select it, click Remove Device, and click Rescan MIDI.
Chapter 9: Mackie Control 37