Section 3: Final Cut Pro - Euphonix MC Control Artist series Setup Manual

Section 3: Final Cut Pro

Configuring Final Cut Pro to operate with the Artist media controllers is simple.
1. In Final Cut Pro, choose Tools->Control Surfaces.
10
2. Select Euphonix from the Use drop-down menu.
3. Press OK.
Your Artist media controller should now be controlling your application. If not,
make sure Final Cut Pro is the front-most application (i.e., the one receiving key-
strokes and mouse clicks). The Artist media controllers control only the front-
most application.
The Control Surface Configuration dialog opens.
Figure 3-1 Control Surface Configuration dialog
You will see the Euphonix logo with the message in Figure 3-1.
The Artist media controllers connect and update automatically. When you
open your audio mixer your Euphonix media controller(s) will control Final
Cut Pro.
AUDIO | VIDEO MEDIA CONTROLLERS