Connecting Case Components - ECS SF2/648FX Manual

Connecting Case Components

After you have installed the motherboard into a case, you can begin connect-
ing the motherboard components. Refer to the following:
1. Connect the CPU
cooling fan cable to
CPUFAN1.
2. Connect the case
cooling fan connector
to CASFAN1.
3. Connect the case
switches and indicator
LEDs to the PANEL1.
If there are 2 pins in
the case LED cable,
connect to SJ1.
4. Connect the standard
power supply connec-
tor to ATX1.
5. Connect the auxiliary
power supply
connector to ATX2.
CPUFAN1/CASFAN1: FAN Power Connectors
Pin Signal Name
1 GND
2 +12V
3 Sense
SJ1: Single color LED header
Pin Signal Name
1 ACPI LED
2 ACPI LED
3 SB5V
ACPI LED function:
1
S0
Light
SJ1
Function
System Ground
Power +12V
Sensor
Function
MSG LED (-) green
MSG LED (-) green
Power LED (+)
S1 S3
Blinking Blinking
10
S4/S5
Dark