Building Codes And Safety Standards - Williams 4505621 Installation & Operating Instruction Manual

Gravity vented floor furnace
Table of Contents

Advertisement

BUILDING CODES AND SAFETY STANDARDS
THE DESIGN
OF THIS FURNACE
IS NOT CERTIFIED
FOR USE IN MOBILE
HOMES,
TRAVEL
TRAILERS
OR CAMPERS.
THIS FURNACE
MUST
BE PROPERLY
VENTED
TO THE OUTSIDE
FOR SAFE OPERATION.
DO NOT OPERATE
THIS FURNACE
WITHOUTAN
ADEQUATE
VENTING
SYSTEM.
THE DESIGN
OF THIS APPLIANCE
COMPLIES
WITH ANSI Z21.48.
THE SECTIONS
OF THIS MANUAL
PERTAINING
TO VENTING
AND GAS PIPING PROVIDE
ONLY
BASIC GUIDELINES.
BE SURE THE INSTALLATION
OF THE VENT AND GAS PIPING COMPLIES
WITH LOCAL CODES.
IN THE ABSENCE
OF LOCAL CODES,
BE SURE TO COMPLY
WITH THE
NATIONAL
FUEL GAS CODE ANSI Z223.1.
IMPORTANT
GENERAL
INFORMATION
Read these instructions completely before beginning the installation and use these instructions as a guide during the installation.
Your furnace has been carefully designed and constructed.
The design of this furnace has been tested according to the
standards set by the American National Standards Institute, and the design has been certified by the American Gas Association
as conforming to these standards.
Care has been taken to assure that your furnace will operate safely, efficiently, and
reliably, but your furnace must be properly installed.
Only a licensed or otherwise qualified gas equipment installer should
install this furnace, the vent serving this furnace, and the gas piping.
Installation procedures should comply with these
instructions and the latest edition of the American National Standard National Fuel Gas Code Z223.1. You should also refer
to any local codes or ordinances which may apply. Improper installation of the furnace, vents or gas piping, can subject you
and your property to fire, explosion, or asphyxiation hazards and will void the warranty offered by Williams Furnace Co. Do
not be satisfied with an improper installation.
Do not use this furnace if any part has been under water. Immediately call a qualified service technician to inspect the furnace
and to replace any part of the control system and any gas control which has been under water.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

600562145056226005622

Table of Contents