CLOSED CAPTION DECODE FUNCTION
Closed caption broadcasting (character
information) in the video signal allows the
displaying of characters on the screen. This unit
has a closed caption decoder which allows, these
titles to be displayed when receiving these
broadcasts or playing a video cassette or Video
Disc with the
mark, etc.
CC
NOTES:
• When a video cassette or Video Disc carrying the
mark etc. is played, the closed caption signal
CC
may not be output depending on your VCR or Video
disc player.
• During TV broadcast reception, closed caption
signal may not be decoded properly if the receiving
broadcast signal is weak.
• Closed caption signal may not be decoded properly
depending on the recording condition of the video
cassette tape.
• The character information will not be displayed
while a menu is displayed. To turn on the character
information, press the MENU button and turn off
MENU.
• This function can be used only during TV and 480i
input.
46
1
Press MENU and select CC by using the
| or \ button and then pressing «
button. (Refer to page 26.)
2
Select CC in the same way.
C C
C C :
M O D E : C C – 1
3
Set CC to ON or ON IF MUTE.
•
If you have selected ON IF MUTE, closed captions will be
displayed only while MUTE is functioning with the MUTING
button pressed while you are viewing or listening to the
program.
C C
C C :
M O D E : C C – 1
4
Select MODE .
C C
C C :
M O D E : C C – 1
5
Select the desired CC (Closed Caption CC-
1 to CC-4) or TEXT (TEXT-1 to TEXT-4).
C C
C C :
M O D E : C C – 1
6
After setting, press MENU to turn the
menu off.
c
c
O F F
SELECT
SET
MENU
SET
END
c
c
O F F
O N
O N
I F MU T E
SELECT
SET
SET
MENU
END
c
c
O N
SELECT
SET
SET
MENU
END
c
c
O N
T E X T – 1
C C – 2
T E X T – 2
C C – 3
T E X T – 3
C C – 4
T E X T – 4
SELECT
SET
MENU
SET
END