REMOTE CODE SET UP
Transmitting LED
1
86
USING THE TV REMOTE
CONTROL UNIT TO CONTROL
OTHER DEVICES
2
REMOTE CONTROL UNIT SETTING BUTTONS
3
1 EDIT/LEARN button
EDIT:
LEARN:
2 Mode switch
Use to switch the remote control unit modes.
3 Light button
When this button is pressed, all the buttons on the remote
control unit will light. The lighting will turn off if no
operations are performed within five seconds.
This button is used for performing operations in dark places.
When the EDIT/LEARN button is pressed at the
same time as number button 1, the mode will
change to preset code edit mode. (See page
81.)
When the EDIT/LEARN button is pressed at the
same time as number button 2, the unit's
capability to learn and store command codes
from other remote control units will be activated.
(See page 84.)