Remote Control Unit Functions - Pioneer Elite PRO-530HDI Operating Instructions Manual

REMOTE CONTROL UNIT FUNCTIONS

Mode switch
1
2
3
4
5
6
7
8
9
0
-
=
~
22
Set the mode switch to TV.
1
TV Power button (STANDBY/ON)
Turns the power of the monitor on and off.
2 INPUT Selector buttons (TV, INPUT 1 to INPUT 6)
Press the button to select the source you wish to watch.
The screen will display your selection.
3 ANT (antenna selector) button
Press to switch between ANTENNA-A and ANTENNA-B
when you wish to watch TV.
4 Direct channel selection buttons
Press the button (or buttons) that corresponds to the
channel that you wish to watch.
5 CH RETURN (channel return) button
! Press to switch between the current channel and the
channel you were watching immediately before.
6 CH (channel) +, – button
@
Press plus (+) or minus (–) to tune in a higher or lower
channel. Only the preset channels can be tuned in using
these buttons.
#
7 MUTING button
Press to temporarily turn off the sound. Press again to return
to the previous volume level.
8 RETURN button
Returns to the previous menu screen.
9 Select/Adjust/Set buttons (SET/ENTER, |, \, », «)
|, \, », «:
SET/ENTER: Press to activate the selected function.
0 FAVORITE CH buttons
These buttons call up the channels that have been assigned
to them.
$
%
Press to select or adjust items on the menu
screen.