Pioneer Elite PRO-530HDI Operating Instructions Manual page 89

Mode switch
1
2
3
4
5
6
7
CABLE, SAT and DTV cannot be selected at the same time.
When a digital tuner is connected to the monitor, set the mode
switch to CBL/SAT. The tuner can be operated with the remote
control unit if buttons 1 to - have learnt the functions (see
page 84).
1 Direct channel selection buttons
Press the button (or buttons) that corresponds to the
channel that you wish to watch.
2
button
Used in channel selection.
3 CH (channel) +, – button
Press plus (+) or minus (–) to tune in a higher or lower
channel.
8
4 Select/Set buttons (SET/ENTER, |, \, », «)
|, \, », «:
9
SET/ENTER: Press to activate the selected function.
5 DTV INFO button
0 When this button is pressed, information on DTV will be
displayed.
6 FAVORITE CH/Colored (blue, red, green and yellow)
buttons
FAVORITE CH: Used for making FAVORITE CH settings
-
Blue, Red, Green, Yellow:
7
SOURCE POWER button
Turns the power of the DTV (digital tuner) on and off.
8 CH ENTER button
Fix the selected channel with the direct channel selection
buttons.
9 CH RETURN (channel return) button
Press to switch between the current channel and the
channel you were watching immediately before.
0 MENU button
When this button is pressed, the menu screen will be
displayed.
- DTV GUIDE button
When this button is pressed, the DTV guide screen will be
displayed.
REMOTE CODE SET UP
DTV CONTROL BUTTONS
Press the button to select items on the DTV
MENU screen.
with the digital tuner.
Used to make selections from the digital
tuner menu.
89