Changing Password - Pioneer Elite PRO-530HDI Operating Instructions Manual

CHANGING PASSWORD

We suggest you write down your password so you don't forget it.
◊B√¿≥≤?ÙÛc ◊B√¿.≤?ÙÛc
Your PROGRAM BLOCK password No.:
A password must be entered to turn program blocking on and off. The
default password is '1234', but it is strongly recommended that you change
the password.
1
Press MENU and select SET UP by using
the | or \ button and then pressing «
button. (Refer to page 26.)
2
Select CHANGE PASSWORD in the same
way.
3
Enter current password.
•
•
Cut along dotted line and file after reading and filling out.
If you forget the password
When the message 'INPUT YOUR PASSWORD' in step 3 is
displayed, press the RESET button on the front panel and hold it
down for 3 seconds or longer.
The password reverts to "1234".
c c
S E T U P
C H A N N E L S E T U P
C O N V E R G E N C E
P R O G R A M B L O C K
C H A N G E P A S SWO R D
S Y S T E M I N / O U T
D I G I T A L I N T E R F A C E
SELECT SET
Press numeric buttons '0' through '9' to enter a four digit
password.
If no password has been previously set, enter the default
password of '1234'.
C H A N G E P A S SWO R D
I N P U T Y O U R P A S SWO R D
E X I T
SET MENU END
c
c
– – – –
SELECT SET SET MENU END
39