Listening To Station Presets - Pioneer SX-315 Operating Instructions Manual

06 Using the tuner
3 Press CLASS to select a class (A, B or C).
Press repeatedly to change the class displayed in the
front panel display.
4 Use the < and > buttons to select a preset
number in which to store the station.
5 Press ENTER.
After pressing ENTER, the preset class and number stop
blinking and the receiver stores the station.

Listening to station presets

You will need to have some presets stored to do this. See
Saving station presets on page 23 if you haven't done this
already.
1 Press FM/AM to select the tuner.
2 Press CLASS to select a class (A, B or C).
Press repeatedly to change the class displayed in the
front panel display.
3 Use the STATION +/– buttons to select the preset
you want.
Note
• If the receiver is left disconnected from the AC power
outlet for an extended period, the station memories
will be lost and will have to be reprogrammed.
24
En
INPUT SELECTOR
TUNER
EDIT
FM/AM CLASS
STATION
– +
ENTER
Naming station presets
You can name saved presets with four-character names.
1 Use the CLASS and STATION +/– buttons to find
the station preset you want to name.
2 Press TUNER EDIT.
3 Use the (cursor left/right) buttons to select
a character, then press ENTER.
After pressing ENTER, the cursor moves to the next
charcter space.
4 Repeat step 3 to enter the remaining three
characters.
Pressing ENTER after the fourth character stores the
station name.