Pioneer PRO-510HD Service Manual page 76

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5
REMOTE CONTROL UNIT (AXD1448: CU-SD110) for PRO-610HD and PRO-510HD
268
Set the mode switch to TV/DTV.
1 TV POWER button (STANDBY/ON)
Turns the power of the monitor on and off.
2 Input Selector buttons (TV, DTV*
Press the button to select the source you wish to watch.
The screen will display your selection.
3 SCREEN MODE button
Press to select the SCREEN MODE.
4 ANT (antenna selector) button
Press to switch between ANTENNA-A and ANTENNA-B
when you wish to watch TV.
5 Direct channel selection buttons
Press the button (or buttons) that corresponds to the
channel that you wish to watch.
6 CH (channel) +, – button
Press plus (+) or minus (–) to tune in a higher or lower
channel. Only the preset channels can be tuned in using
these buttons.
7 MUTING button
Press to temporarily turn off the sound. Press again to return
to the previous volume level.
8 Select/Adjust/Set buttons (SET/ENTER, 2, 3, 5, ∞)
2, 3, 5, ∞:
Press to select or adjust items on the menu
screen.
SET/ENTER: Press to activate the selected function.
9 FAVORITE CH buttons
These buttons call up the channels that have been assigned
to them.
1 , INPUT 1 to INPUT 4)