Pioneer PRO-510HD Service Manual page 5

Assembly Adjustment Location Guide
If POWER SUPPLY ASSY
If DEFLECTION SERVICE ASSY
If CONV. AMP ASSY
If R, G or B CRT DRIVE ASSY
If DIGITAL CONV. ASSY
If VIDEO ASSY
If SIGNAL ASSY
If SUB VIDEO ASSY
If AV I/O ASSY
If CRT ASSY (R, G or B)
If LENS ASSY (R, G or B)
If MIRROR and SCREEN
If OTHER ASSY
Note :
*1: Readjustment necessary
*2: Turn on the power and confirm the screen. When adjustment deviates, it is readjusted if necessory.
• When the EEPROMs are replaced, check the status of the unit.
• If any IC of the EEPROM is damaged, readjustment of all the items is necessary.
• The necessary adjustment items differ, depending on the assembly or optical part replaced. Check and readjust the adjustment items
corresponding to the replaced assembly or part, following adjustment procedures 1 to 9.
Example: When the DIGITAL CONV. Assy is replaced, perform the following:
3. Focus check/adjustment
6. Convergence check/adjustment
PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
is repaired or replaced
4. Test-cross position check/adjustment
No adjustment is required
1 Brightness Adjustment ( 2)
3
Focus Adjustment (VR1: FOCUS VR) ( 2)
5
Screen Size Adjustment ( 2)
6
Convergence Adjustment ( 2)
7 White Balance Adjustment ( 2)
5 Screen Size Adjustment ( 2)
6
Convergence Adjustment ( 2)
1 Brightness Adjustment ( 1)
7
White Balance Adjustment (Composite STD : 1, Others : 2)
3 Focus Adjustment ( 2)
4 Test-cross Position Check ( 2)
Screen Size Adjustment ( 2)
5
Convergence Adjustment ( 2)
6
1 Brightness Adjustment ( 2)
7
White Balance Adjustment (Composite STD : 1, Others : 2)
Panel Adjustment ( 1)
8
9 Panel Adjustment for DTV ( 1)
7 White Balance Adjustment ( 2)
4 Test-cross Position Check ( 2)
7 White Balance Adjustment ( 2)
No adjustment is required
1 Brightness Adjustment ( 1)
2 Deflection Yoke Adjustment ( 1)
Focus Adjustment (Lens : 2, VR1 Focus VR : 1)
3
Convergence Adjustment ( 2)
6
White Balance Adjustment (Composite STD : 1, Others : 2)
7
3 Focus Adjustment (Lens : 1, VR1 Focus VR : 2)
6 Convergence Adjustment ( 2)
Convergence Adjustment ( 2)
6
No adjustment is required
5. Screen size check/adjustment
197