Region Code Information - Pioneer DVD-114 Operating Instructions Manual

7) Audio Output
connector for analog audio output, uses a Modex 70553 connector
Select the appropriate cable from the following chart:
Pin Name
1 L
2 G
3 G
4 R
8) Device Configuration Jumper
set this jumper switch to select the drive use mode supporting the computer
(jumpered = ON; no jumper = OFF)
Pin Name
1
1 MA*
2 SL
3 CS
4
5
9) Host IDE Interface
40-pin I/O connector in accordance with ATA specifications
10) DC Input
power supply input for DC +5 V and +12 V
Pin Name
1 +12
2 G
3 G
4 +5
4.3

Region Code Information

The maximum number of times the Region Code may be changed is five ( 5 ),
including the initial setting. The fifth change becomes PERMANENT.
Note: Region Codes are part of the DVD Standard, however, Region Codes on DVD
discs are optional. DVD discs with no specified Region Code may be played on any
player.
Function
Left channel audio output
Ground
Ground
Right channel audio output
Function
on Drive set to Master mode
on Drive set to Slave mode
on Drive set to Cable Select mode
Reserved
Reserved
Function
Power supply input for DC +12 V
Ground
Ground
Power supply input for DC +5 V
- 7 -
DVD-114 Operating Instructions