Download Print this page

Region Code Information - Pioneer DVR-A03 Operating Instructions Manual

Dvd-r/rw and cd-r/rw writer, dvd-rom and cd-rom reader atapi tray-load drive
Hide thumbs

Advertisement

9) Audio Output
connector for analog audio output, uses a Modex 70553 connector
Select the appropriate cable from the following chart:
Pin
Name
1
L
2
G
3
G
4
R
10) Device Configuration Jumper
turn OFF the unit then set this jumper switch to select the drive use mode supporting
the computer ( jumpered = ON; no jumper = OFF)
Pin
Name
1
MA*
2
SL
3
CS
4
5
* Pin #1 is active upon initial shipment.
11) Host IDE Interface
40-pin I/O connector in accordance with ATA specifications
12) DC Input
power supply input for DC +5 V and +12 V
Pin
Name
1
+12
2
G
3
G
4
+5
4.3

Region Code Information

The maximum number of times the Region Code may be changed is five (5),
including the initial setting. The fifth change becomes PERMANENT.
Note: Region Codes are part of the DVD Standard, however, Region Codes on DVD
discs are optional. DVD discs with no specified Region Code may be played on any
player.
Function
Left channel audio output
Ground
Ground
Right channel audio output
Function
on
Drive set to Master mode
on
Drive set to Slave mode
on
Drive set to Cable Select mode
Reserved
Reserved
Function
Power supply input for DC +12 V
Ground
Ground
Power supply input for DC +5 V
- 7 -
DVR-A03/ DVR-103 Operating Instructions

Advertisement

loading

  Related Manuals for Pioneer DVR-A03

This manual is also suitable for:

Dvr-103