Get Information (Dvd) - Pioneer DVD-V5000 Command Protocol Manual

Format : argument1, argument2 ET
Explanation :
cursor is on the screen. The command specifies the position of the cursor
with two arguments. The upper left on the screen is (0,0), the lower right on
the screen is (719, 479) for NTSC playback, or (719, 575) for PAL. The
format is stated below.
Argument1
000000
X X X
1 2 3
If the arguments are available, the player immediately returns "R<CR>"*.
If the argument number is unavailable, an error message (E06) is returned.
* The return "R<CR>" refers only to checking for an argument number. The
player is incapable of verifying the existence of a button with this command.
Execution :
String
256384ET<CR>
6.34

Get Information (DVD)

Function : gets the disc information
Format : Integer GI
Explanation : The command, combined with a 4-digit ID and a 4-digit Sub-ID,
returns the requested information to the player.
Integer = XXXXYYYY
ID (XXXX)
0000
0001
0001
00002 or more
The player only returns system parameter information in cases where ID =
0001, otherwise the player returns error message E06.
The command emulates the "left" click of the mouse while the
Argument 2
719479
Y Y Y
1 2 3
Status Return
R<CR>
Sub-ID (YYYY)
Any number
0000 to 0023
More than 0023
Any number
- 58
DVD-V5000 DVD Player
RS-232 Command Protocol
Position
Upper left limitation on the screen
Lower right limitation on the screen
Anywhere on the screen
DVD player
Emulates the "left" click at the
point (256,384) on the screen
Return Data from the Player
E06 (argument error)
System Parameter Info (4-digit)
E06 (argument error)
E06 (argument error)