Pioneer DVD-V5000 Command Protocol Manual page 44

Example:
Segment Play Command : Title 02, from Frame 3600 to Frame 4800
> 4020036000048007
BP
1216 + BARCODE_SRP #n
+ 1
+ 2
+ 3
+ 4
+ 5
+ 6
+ 7
+ 8
+ 9
+ 10
+ 11
+ 12
+ 13
+ 14
+ 15
*BARCODE_SRP #n : Barcode #n Search Pointer
Outline of Barcode Command : Barcode Command has these formats as follows.
DVD 4 digits command (sets the player, the video and the audio control)
DVD 6 digits command (sets the attribute control)
DVD 10 digits command (Chapter Search Command)
DVD 12-digit command (Chapter Segment Play)
DVD 14-digit command (Frame Search)
DVD 16-digit command (Segment Play)
The following four command functions in Command Stack are not regulated
in Barcode Format. These commands are regulated as follows.
1) End of Group mark:
2) REPEAT:
3) WAIT:
4) GOTO:
*Refer to the Barcode Format
Data
a4H
a0H
a2H
a0H
a0H
a3H
a6H
a0H
a0H
a0H
a0H
a4H
a8H
a0H
a0H
a7H
The first byte is (ffH), the others are (00H)
(49a3H)
(4bxxxxH)
(4axxxxH)
- 37
DVD-V5000 DVD Player
RS-232 Command Protocol
Explanations