Naming Station Presets; Listening To Station Presets; Changing The Frequency Step - Pioneer VSX-815-S/-K Operating Instructions Manual

Audio/video multi-channel receiver
Table of Contents

Advertisement

08
Using the tuner

Naming station presets

For easier identification, you can name your
station presets.
1
Choose the station preset you want to
name.
See Listening to station presets below for how
to do this.
2
Press T.EDIT (TUNER EDIT).
The display shows ST. NAME, then a blinking
cursor at the first character position.
3
Input the name you want.
Choose a name up to four characters long.
• Use the MULTI JOG dial (front panel) or the
ST +/– buttons (remote) to select
characters.
• Press ENTER to confirm a character. If no
character is input, a space is input.
• The name is stored when ENTER is pressed
after choosing the fourth character.
Tip
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
• Once you have named a station preset, you
can press (TUNER) DISPLAY when
listening to a station to switch the display
between name and frequency.

Listening to station presets

You will need to have some presets stored to do
this. See Saving station presets above if you
haven't done this already.
1
Press TUNER to select the tuner.
2
Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
56
En
3
Press ST +/– to select the station preset
you want.
• You can also use the number buttons on
the remote control to recall the station
preset.

Changing the frequency step

If you find that you can't tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here's how to
switch the setting:
VSX-515 model:
1
Switch the receiver into standby.
2
On the front panel, press
ON while you press and hold the CLASS
button.
The channel tuning step alternates between
10K STEP and 9K STEP each time you do this.
VSX-815/915 model:
1
Switch the receiver into standby.
2
On the front panel, press
ON while you press and hold the BAND
button.
The channel tuning step alternates between
10K STEP and 9K STEP each time you do this.
STANDBY/
STANDBY/

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents