Table of Contents
Advertisement
Screen Settings
Menu
Adjusting the Position, Size, Fine Picture, Picture Adj
The position of the image can be adjusted and flickering
of the image can be corrected,
Example: Adjusting the vertical position in the normal
mode
Press
the PROCEED
button
on the remote
control
to
display
the MAIN MENU
on the screen,
then...
1, Use the • and • buttons to select "SCREEN", then
press the PROCEED button. The "SCREEN"
menu
appears.
Default settings (when RGB/PC is selected)
3, Adjust using the • and • buttons,
* ifneitherthe•or•buttonispressedwilhin5
seconds,
the current setting is set and the previous screen
reappears.
To
continue
making
other
computer
image
adjustments
..,
Repeat from step 2.
4, Once all adjustments are completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more,
* The settings on the SCREEN menu are not preset at the
factory.
To select a mode...
Use the • and • buttons
to select a mode.
The
mode
switches
as follows
when
the •
and •
buttons
are pressed:
i_ NORMAL <_ FULL _]
* The mode can also be switched by pressing the "WIDE"
button on the remote control.
2, _lbadjust
the vertical position
...
Use the • and • buttons
to select "V-POSITION".
Information
• When "AUTO PICTURE" is "OFF"
When
Auto
Picture
is oft; the Fine Picture
and the
Picture ADJ. items are displayed
so that you can adjust
them.
23
Advertisement
Table of Contents
