Using The Remote Control; Preparing Tile Remote Control For Use; Installing The Remote Control Batteries; Using The Remote Control With A Vcr Or A Cable Tv Converter - Toshiba CX32H60 Owner's Manual

Using the remote control
Preparing the remote control for use
With the remote control, you can operate your TV, most VCR
models, and cable TV converters together, even if they are different
brands. If you will be using your TV with a Toshiba VCR, your
remote control is already programmed and ready to use. If you own
different brands of VCRs and/or converters, you first have to program
your remote control. (See "Programming the remote control for use
with a VCR or a cable TV converter" on page 8.)
Installing the remote control batteries
To install the batteries:
1. Slide the battery cover off of the back of the remote control.
III>o°
I
2. Install two %A" size alkaline batteries. Match the + and - signs
on the batteries to the signs on the battery compartment.
o
O
3. Slide the battery cover back on to the remote control until the
lock snaps.
Using the remote control with a VCR or a cable
TV converter
To control a Toshiba VCR:
Set the TVICABLE/VCR switch to the VCR position. The
buttons shown to the right will then control the VCR. The rest
of the buttons will operate the TV as usual.
To control a cable TV converter:
Program the remote control to recognize the brand of your
converter (see "Programming the remote control for use with a
VCR or cable TV converter," page 8). The shaded buttons shown
on the right will control the cable TV converter.
Set the TViCABLE/VCR switch to the CABLE position.
Note:
Thisremote control's functions may or may
not operate your VCR or cable TVconverte_
Referto the owner's manualssupplted with
the equipment to see which featuresare
available.In addition, the original controllers
may havefeatures not avaslable on this
remote control Ifyou would like to continue
to use these features,you may want to use
the original remote control.
Caution:
• Dispose of your batteriesin a designated
disposalarea. Do not throw your batteries
into a fire.
• Do not mix battery _ypesor combine used
batteries with new ones.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• Ifyou do not intend to use the remote
control for a long time, remove the
batteries.
REC_J- MUTE i
@ ®
®®®
®@®
®®N
BEe _FAVCH TV,A_DEO --I
STILL SOURCE PiP
SLOW PAUSE HEW FF
-- POWER
_ Channel
Number
-- Enter
-- Channel TA
TViCableNCR
TVNCR
Play
Stop
Record
Fast Forward
Rewind
Pause
Slow
/.---->
J
c_,J
'...____/
f--_
UL.
I