Toshiba DLP 46HM84 Owner's Manual page 58

How to replace the lamp unit (continued)
5. Grasp the lamp unit handle and gently pull the lamp unit straight
out of the TV. Set the old
lamp
unit aside
(see "Lamp unit disposal"
on page
60).
6. Carefully insert the new lamp unit straight into the TV until it is
fully seated.
Note :
• Never subject the lamp unit to excessive shock.
• Never touch the lamp unit glass or otherwise get it dirt_
Doing so may affect the image quality and reduce the service life of the
/afT?p.See "Cleaning the lamp unit glass" at right.
7. [Mng a manual Phillips screwdriver, tighten two lamp unit screws.
Note: Hand-tighten only. Do not use an electric screwdrive_
Lamp unit screw
(use manual Phillips
screwdriver only)
>'\
//_ NOTE
: Make sure the lamp unit and screw are
installed securely; otherwise, the TV may not turn on
and the lamp life may be shortened.
Cleaning the lamp unit glass
If you accidentallytouch the lamp unit
glassor otherwise get it dirty,wipe it with a
lint-freelens deaning doth (suchas a doth
[or deaning camera lenses or eyeglasses).
_ CAUTION:
NEVER clean
a
hot lamp with any type of
flammable liquid or aerosol cleaning
agent. Many ordinary cleaning agents (such
as glasscleaners] contain chemicals that may
be flammable at certain temperatures. If the
lamp unit is not allowed to cool for at least
one (1] hour,such chemicals may ignite.
(Continued on next page)
I 58
#01E56-60 46,52,62HM84 58
Black
(E) 46HM84, 52HM84, 62HM84
5/31/04,12:20 PM
[