Toshiba SD-V393SU Owner's Manual page 28

÷
Gner setting (continued)
iii 112 i)
............... VCR MENU
ENTER
SET +/-
-- 0-9
Repeat the step 1 on page 27. Then press SET + or
- to select the "ADD/DELETE" and press ENTER.
To Add or Delete desired channels
1) Press Direct channel selection buttons (0-9)
or SET +/- to select a channel number you want
to add or delete.
2) To add channels
Press ENTER until "ADD" appears on the screen.
To delete channels
Press ENTER until "DELETE" appears on the
screen. The channel number will blink
3) Repeat 1) to 2) to add or delete other channel.
• •
®@@@
Press VCR MENU until the menu screen is cleared.
VCR MENU
SETUP
When you don't want to receive a weak signal broadcast, a
Blue back screen can be obtained by selecting the NO NOISE
BACKGROUND "ON". When the unit is shipped from the fac-
tory, the NO NOISE BACKGROUND is set to "ON".
Repeat the steps 1~2 on page 26 and press SET + or -to select "NO NOISE BACKGROUND".
Press ENTER to select "ON" or "OFF" position.
Press VCR MENU until the menu screen is
cleared.
VCR MENU
SETUP
÷
28
2H 0101A (E)p26-31
28 _ 2/10/05, 7:32 PM