Toshiba SD-V393SU Owner's Manual page 24

@ck setting
The AUTO CLOCK function will automatically set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches
for a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately 4 minutes for the clock
to set itself automatically.
L _-) ............
o
POWER
VCR DVD
-- VCR MENU
ENTER
SET +/-
-- CALL
÷
Preparation:
• Turn ON the TV and select the corresponding video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
Plug the AC power cord to the AC outlet.
Make sure the DVDiVCR is turned off.
POWER
*
If you press POWER, the Auto Clock
set is not programmed.
Wait at least three minutes and press POWER.
POWER
Press CALL to check the clock setting on
the on screen display.
CALL
DISPLAY
0
If the clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.
The auto clock adjustment will be updated at 6:00
AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
• If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be
left on.
• The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
When shipped from factory the AUTO CLOCK is set to "ON".
But if you do not want AUTO CLOCK setting:
PressVCR MENU.
VCR MENU
SETUP
Press SET + or - to select "SYSTEM SETUP",
then press ENTER.
Press SET + or - to select "AUTO CLOCK".
Press ENTER to select "OFF".
Press VCR MENU repeatedly to return to the
normal screen.
VCRMENU
•
When the AUTO CLOCK is set to
SETUP "OFF", the AUTO CLOCK adjust-
ment does not function.
• Set the clock manually [_.
÷
2/10/05, 7:32 PM
÷