Toshiba SD-V393SU Owner's Manual page 27

her setting
This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR's memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE
menu option to the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
C3
-;-i----ZEi3W
_ -;;;ziY-i7_:.!
D
............. 'x ;;}
!; .%
)
CD( _'_CD
© Q © )
(} O {:; o
VCR DVD
VCR MENU
ENTER
SET +/-
÷
/
Preparation:
• Turn ON the TV and select to the corresponding
video input.
• Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
Press VCR MENU. Press SET + or - to select
"CH SETUP", then press ENTER.
VCR MENU
SETUP
Press SET + or- te select "TV/CABLE'.
Press ENTER to select the TV or CABLE mode.
The arrow indicates the selected mode.
Press VCR MENU until the menu screen is
cleared.
VCR MENU
SETUP
©
Note:
You can't select"CH SETUP'if you setthe channelto "Ll"or
"L2".
Repeat left step 1 and press SET + or - to
select "AUTO CH MEMORY".
Press ENTER.
Auto tuning will begin. The channel dis-
play will count up and when finished
the screen returns to normal.
w
C
27
÷
2H20101A (E)p26-31 27 _ 2/10/05, 7:32 PM