Accessories; System Configuration - Hitachi EH-150 Series PLC Engineering Manualline

Engineering Guideline

Accessories

I/O controller module for expansion rack
Type
EH-IOC
Connecting cable between base rack and I/O controller
Type
EH-CB10
Dummy module
Type
EH-DUM
Battery
Type
LIBAT-H
Cables
Type
EH-PROG20
EH-HEH30
EH-32XY04
EH-CUCN40

System Configuration

I/O controller module for mounting on the CPU-Slot of the expansion rack.
Cable to connect the I/O controller EH-IOC with the connector on the right
Dummy module to cover not used slots on base and expansion rack.
Battery for the CPU to keep the contents of the retentive area and the RTC
running while the power is switched of.
Programming cable to connect the serial communication ports of the CPU's
to a 9-pole Sub-D serial interface of a PC (lenght 2m).
Communication cable between the serial communication ports of the CPU's
to an HMI of Hitachi's EH-HMI series (lenght 3m).
Ready-to-use connecting cable for the 32- and 64-point I/O modules with
dedicated plug on one end, open on the other end (lenght 4m).
Ready-to-use connecting cable for the Counter-modules with dedicated
plug on one end, open on the other end (lenght 4m).
side of the base rack.
9
EH-150 Series PLC