Inserting Two R6 (Size Aa) Batteries Into The Remote - Sony MHC-LX10000 Operating Instructions Manual

[]
Connect the FM and AM antennas,
Set up the AM loop antenna, then connect
it.
Extend the FM lead
antenna horizontally
[] Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press I/@, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wal! outlet, detach it from the plug
(only for models equipped with an adaptor).
Note
Install this system so that the powe! co_d can be
unplugged flora the wall socket immediately in
the event of trouble.
Notes
• Keep the speaker cords away flom the antennas to
prevent noise.
• Be sine to connect both left and right surround
speakers.
• Be sure to malch the color of the speaker terminals on
the lmit and the connectors.
• Be sure to connect the speakers secmely and
CO1Tectly. When connecting speaker cords, inse_t the
connectors stlaight into the terminals.
To connect optional components
See "Hooking up optional components" on page 27
Inserting two R6 (size AA)
batteries into the remote
Note
It'you do not use the 1emote for a long period of time
remove the batteries to avoid possible damage fiom
battery leakage and corrosion
Tip
With normal use, the batteries should last for about six
months When the remote no longer operates the
system, replace both batteries with new ones.
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
When carrying this unit
Do the _llowing procedure to protect _e disc
mechanism.
Use buttons on the unit for the operation.
1 Press I/@ to turn on the system.
2 Press CD.
3 Make sure that all discs are removed
from the unit.
4 Hold down CD, then press I/_ until
"LOCK" appears in the display.
5 Release I/_ first, then release CD.
6 Unplug the AC power cord.
5'
I,Q
r,
7 us