Clearances - Heat & Glo EM-415 - 36” Owner's Manual

B. Clearances
WARNING! Risk of Fire! You must comply with all minimum air space clearances to combustibles as specified in Fig-
ure 6.2. DO NOT pack required air spaces with insulation or other materials.
Figure 3.2
Storm Collar
Roof Flashing
(attic)
(insulation)
2 in. (51 mm) min.
Ceiling Firestop
Adapter attached here
(not shown)
48 in.
1219 mm
0 in.
to floor
Clearances to Combustible Materials
Note: Chimney air kit not shown, but required in Canada.
Heat & Glo • EM-415, EM-485 • 33056 • Rev AF 7/12
Shaded areas
represent
2 in. (51 mm) min.
air space clearance
required around pipe
Attic
Insulation
Shield
(ceiling)
Offset/Return (secured
with hanger straps)
(ceiling)
Must have 2 in. (51 mm)
minimum clearance
to header
0 in. to level
of standoffs
3/4 in. (19 mm) to back &
sides of appliance
(except at nailing flanges
where it is 1/2 in. [13 mm])
•
19