FRONT_PANEL:__Controls_&_Features__
STANDBY:
Perfect for set breaks... this toggle switch also serves an even more important purpose. In the Standby position the
tubes are at idle so that during power up they may warm up before being put to use. Before Power is switched on make sure the
STANDBY switch is in the Standby position.
TWEED
ON
Wait at least 30 seconds and then flip the STANDBY switch to the ON position. This prevents tube problems
and increases their toneful life substantially.
POWER_OFF
STANDBY
ON
Now that we have reviewed the features and controls of the Front Panel and you have a handle on how they interact to achieve the
sound you want, let's move to the Rear Panel and cover the features found there.
(Continued)
REST_AREA
PAGE_11