Page 2
- the concept "Shrink the package - Enlarge the Tone" was in full effect here. If you've already played your 2:90, you know how incredibly big and bold, sweet and juicy it sounds... If you chose it by reputation alone, stop! Put this down a second, connect it to your preamp (hopefully TriAxis) and favorite cabinets.
FRONT PANEL One look at the 2:90's front panel probably told you "easy to use" ... right? We think so... but after a closer look, you notice three small LED's labeled - "Deep, 1/2 Drive, and Modern." Since the rest of the Front Panel is virtually self explanatory... let us first explain these three mystery lights.
Page 4
Trigger the 112 Drive to unleash a truly cool and bluesy medium gain lead sound. Darken or brighten to taste either at the tone controls or with the 2:90 presence controls. With an "analog" (non-programmable) pre-amp this becomes a useful "extra mode". With TriAxis many such possibilities await.
Page 5
LEVEL A/B These two pots control the volume level of each side or channel of the 2:90. Since there's only one Standby Switch on this unit they may also be useful as channel muting controls. NOTE: If only one speaker is to be used on one channel and no speaker load on the other, always turn the unused channel’s Level Control to zero.
You may drive the 2:90 with your pre-amp directly or choose to come from the last effect in a chain and drive the power amp this way. Either way is fine and up to your preference.
Need help?
Do you have a question about the 2:90 and is the answer not in the manual?
Questions and answers