Meridian 861 User Manual page 51

DSP PRESETS PREFACE
TV Logic
TV Logic is a movie preset based on ProLogic II with the addition of user-
adjustable steering, designed to give higher intelligibility and a more
appropriate spatial presentation for studio-based TV material.
TV Logic DSP preset parameters
Parameter
Roll
Yaw
Steered All
Mono
In the Mono DSP preset you can choose to listen to:
•
•
If Party? is set to No, the combined or selected signal is played only
through the centre speaker, or the left and right speakers if there is no
centre, to centrally localise high-frequency hiss and clicks.
Note: If Party? is set to Yes, full range bass is played through any speakers
that are not supplemented by a subwoofer, and this may damage small
speakers at high volume levels.
Mono DSP preset parameters
Parameter
Input
Academy
Party?
Options
Off, Low, Med, High
Off, Low, Med, High
Steered Rear, Steered Side,
Steered All
Only one of two input channels, such as when different languages or
material are carried on each channel.
A combined version of the two input channels, such as if the material
was originally mono and has been conveyed on a 2-channel carrier.
Options
Auto L+R, Input L, Input R,
Input L+R
Off or On
No or Yes
What it changes
The degree of left-right steering.
The degree of front-rear steering.
Which of the surround channels are
generated by steering.
What it changes
The channel selected.
Select On to include an equalisation
(recommended by Lucasfi lm Ltd) to correct
for a high-frequency balance in some old
mono fi lms.
Select Yes to play the mono signal through
all speakers, including subwoofers.
43