Meridian 861 User Manual page 113

USING MERIDIAN ROOM
CORRECTION
The following dialogue box will count down to the test:
A signal will then be played through the main left loudspeaker.
• Check that the SPL meter reading does not indicate that the input signal
is too large for the selected range.
On some meters this is indicated by the reading going above 0dB into the
red range of the meter, and on others by the word high appearing on the
display.
The Set up wizard will then indicate whether the test was successful:
If the test did not complete successfully check the SPL meter or microphone
connections and the input card and connector settings and try again. For
more information about problems with the microphone test see
Troubleshooting, page 126.
• Click the Next button to continue.
The next screen lets you choose whether to do an automatic room
optimisation, or create profi les manually.
105