Table of Contents
Advertisement
Auto Mode
1) Install the exhaust hoses and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER
button on the control panel.
÷_,
4) Press the MODE
button until the " \_*,7* ,, icon appears on the control panel display. Select the fan speed
by pressing
the FAN SPEED button.
NOTE:
During
AUTO
mode,
the unit operates
in Dehumidifier
mode when
the room temperature
is betweeno
68 F to 80 F. The unit will operate
in Air Conditioner
mode
when
the room temperature
is above
80 F. In
Auto mode,
the fan speed
cannot
be manually
changed.
Sleep
Mode
(This mode
can only be selected
when
using
the Remote
control
)
1) To set Sleep mode, make sure the unit is in Air Conditioner
mode.
2) Press the SLEEP
Button on the remote control. The"
_
" icon appears on the control panel display.
3) When in SLEEP
mode, the fan will run on low to keep fan noise at a minimum.
4) When in Air Conditioner
mode, the temperature
setting will gradually
increase to 2°F above the original set
temperature
for 6 hours.
After 6 hours the temperature
setting will return to the set temperature.
5) When in Dehumidifier
mode, the temperature
will not change when Sleep mode is selected.
Compressor
Indicator
The"
__ " icon will light up on the control panel display when the compressor
turns on. The "
turn off when the compressor
shuts off.
_J_" icon will
12
Hide quick links:
Advertisement
Table of Contents
