Operating Instructions; Control Panel Buttons - Soleus Air PE2-10R-32 Operating Instructions Manual

OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS (Refer to the images on page 9)
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Auto mode,
Air Conditioner, Dehumidifier, and Fan.
3)
Fan Speed Control - Press the FAN SPEED Button to cycle through the different fan speeds: High,
Medium, and low. The fan speed can be visually distinguished by the speed of the digital air segments
progressing out from the windmill fan image on the Multi-color display.
4)
Temperature - Select the desired temperature by pressing either • or • button when using the unit in
cooling mode. The temperature indicator flashes to display the desired temperature setting. After the tem-
perature is set, the unit will display this temperature setting until it is changed by the user. The Multi-color
display shows temperature in Celsius or Fahrenheit. Press the • or • buttons simultaneously on the con-
trol panel to select the desired temperature setting.
5)
Timer - Turn the unit on - To program the unit to automatically turn on, press the TIMER button
when the unit is off. Once the TIMER button is pressed, the Timer On icon @_1 will flash in the multi
-color display. Choose the preferred time for the unit to turn on (between 1-24 hours) by pressing the • or
• buttons. Once you have chosen the desired time, the Timer On icon will flash for 3 seconds then remain
lit until the unit turns on.
6)
Timer - Turn the unit off - To program the unit to automatically turn off, press the TIMER button when
the unit is on. Once the TIMER button is pressed the Timer Off icon on the display on the unit will flash
, @_o ,, Press the • or • buttons to change the clock to the desired time for the unit to
automatically turn off. The TIMER indicator will flash for 3 seconds to activate your programmed time
then remain solid until the unit automatically shuts down.
7)
Swin,q - To start horizontal oscillation, press the Swing button once. " " icon will appear on the
multi-color display. To stop oscillation, press the Swing button again. Vertical air flow direction can be
adjusted manually.
NOTE: The timer will remember your settings when it is set. If you set the timer while in Air Conditioning
mode, the timer will automatically turn the unit on and off in air conditioning mode according to the desired
programmed times. The timer will also remember the temperature settings, fan speed, and oscillation setting.
The timer works when the unit is in Air Conditioner mode, Dehumidifier mode, Fan mode, and Auto mode.
10