Table of Contents
Advertisement
OPERATING
THE
UNIT
USING
THE
CONTROL
PANEL
Air Conditioner
Mode
1)
Install
the exhaust
hose and window
kit properly
(see pages
7 & 8).
2)
Plug the Power
Cord into an electrical
outlet.
3)
Turn on the unit by pressing
the POWER
button
on the control
panel.
4)
Press the Mode button
until the ....
icon appears
on the Multi-color
display
5)
Press the •
or •
buttons
until the desired
roomtemperoature
appears
on the control
panel
display.
The temperature
ranges
from 61 F - 88 F (16
C - 31
C).
6)
Select
the desired
fan speed
by pressing
the FAN
SPEED
button.
NOTE:
During hot days, the unit will cool the room most efficiently
by setting the temperature
at the lowest
setting and the fan speed on high. Reducing
the length of the exhaust duct, insulating
the exhaust hose and
window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.
NOTE: When the unit is running on cooling mode, the exhaust hose is required
and must be vented
outside using the supplied window kit.
Dehumidifier
Mode
1) Install the exhaust hoses and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER
Button on the control panel.
4) Press the MODE
button until the ....
appears on the control panel display.
NOTE:
The unit operates at low fan speed during dehumidifier
mode. The unit cools room slightly during
the dehumidification.
Keep the windows
and doors closed to aid the effectiveness
of the unit in removing
the
moisture from the room.
NOTE:
When the unit is running
in dehumidifier
mode, the exhaust hose is required
and must be
vented outside using the supplied window kit.
NOTE:
The unit will not perform in dehumidifier
mode when the room temperature
is lower than 61°F.
Fan
Mode
1)
Plug the Power
Cord into an electrical
outlet.
2)
Turn on the unit by pressing
the POWER
button
on the control
panel.
3)
Press the MODE
button
until
the ....
icon appears
on the control
panel
display.
4)
Select
the fan speed
by pressing
the FAN
SPEED
button.
5)
To circulate
more
air, press
the SWING
button
on the remote
control.
The louvers
will oscillate
in our
exclusive
WAVEFLO®
pattern;
back
and forth and up and down,
spreading
more
air throughout
the
room.
NOTE:
It is not necessary
for the exhaust hose and window kit to be installed to operate the unit in fan mode.
11
Hide quick links:
Advertisement
Table of Contents
