Table of Contents
Advertisement
REMOTE SET UP IGul
OPERATION)
Even if your audio/video components are not made by Pioneer,
performing the following procedure will enable you to operate
them with this unit's remote control and GUI. (If you do not
perform
the following
procedure,
you will not be able to
operate other manufacturers'
components
with this unit's
remote control.)
When operating, be sure to connect an IR repeater. (P.12)
[ Calling
up and setting
up presets
1
This unit is already preset with the remote control signals of
other manufacturers'
components.
The following procedure
shows you how to call up and set up these presets.
1. Press the SET UP button that is indicated on all the
function operation displays.
Display switches to the SET UP MENU.
3,
]
(_ (" _ Intelligent
__J System Control
Select the manufacturer
of your component.
• For VCRs, CD players, and TVs, press the next button
and another manufacturers'
list is displayed.
• For TVs, there's
also a display
of CATV terminal
manufacturers
you can select from. (However,
if you
select a CATV manufacturers, a TV cannot be operated.
In this case, learn the TV operation signals. P.35)
4o
The selected
manufacturers'
name
and preset
operation buttons are indicated in black.
This calls up the preset.
To finish remote set up operation, press the EXIT button.
2.
Select one of the six REMOTE SET UP functions.
The display switches to REMOTE SET UP indications. The
name of preset manufacturers
are indicated in white in
the lower half of the screen.
(Example: VCR)
NOTE:
• To return preset buttons to there ongmal setitngs, press the CLEAR
button. The original settings are Pioneer remote control commands,
• Even if a button is preset,
it may not operate.
If this happens,
learn the command using the learning function. (P.35)
34
<ARB70bb,
Hide quick links:
Advertisement
Table of Contents
