Shooting With Remote Control - Pentax K-5 Operating Manual

• Select a mode other than _ or #_ in the [Drive Mode] screen to cancel the
Self-timer shooting. The setting is canceled when the camera is turned off if
[Drive Mode] is set to c (Off) in [Memory] (p.312) of the [1_ Rec. Mode 5]
menu.
• The Shake Reduction function is automatically turned offwhen _ or #_ is set.
• You can set the camera so that the beep does not sound. (p.288)
• The exposure may be affected if light enters the viewfinder. Use the AE Lock
function (p.121 ) or attach the provided ME viewfinder cap. The light entering
the viewfinder has no effect on the exposure when the exposure mode is set
to M (Manual).
Removing the Eyecup FR Attaching the ME Viewfinder cap
iiiiiiiiiiiiiiii
The shutter can be released from a distance by using the optional remote
control unit (p.349).
You can select from the following three settings for Remote Control
shooting.
The shutter is released immediately after the shutter
i Remote Control
release button on the remote control unit is pressed.
Remote Control The shutter is released about 3 seconds after the shutter
i3s (3s delay) release button on the remote control unit is pressed.
Remote Continuous shooting starts when the shutter release
button on the remote control unit is pressed. Press the
_ Continuous
shutter release button on the remote control unit again to
Shooting exit continuous shooting.