Download Print this page

Pentax K-5 Operating Manual page 77

Slr digital camera
Hide thumbs Also See for K-5:

Advertisement

Error message
I
Description
Battery depleted
Not enough battery
power remaining to
clean sensor
Not enough battery
power remaining to
activate Pixel Mapping
Image folder cannot be created
Unable to store image
Settings not stored
The operation could not be
completed correctly
No more images can be
selected
No image can be processed
This image cannot be
processed
The camera failed to create
an image
Camera overheated•
Disabling Live View temporarily
to protect circuitry
The battery is exhausted• Install a fully charged
battery in the camera• (p.49)
Appears during sensor cleaning if the battery
level is insufficient• Install a fully charged
battery or use an AC adaptor kit K-AC50
(optional)• (p.53)
Appears during pixel mapping if the battery
level is insufficient• Install a fully charged
battery or use an AC adaptor kit K-AC50
(optional)• (p.53)
The maximum folder number (999) and file
number (9999) are being used, and no more
images can be saved• Insert a new SD Memory
Card or format the card. (p.281)
The image could not be saved because of an
SD Memory Card error•
The DPOF settings could not be saved because
SD Memory Card is full. Delete unwanted
images and perform DPOF setting again• (p.84)
The camera was unable to measure the manual
white balance or detect dust on the sensor• Try
the operation again• (p.208, p.341)
You cannot select 100 or more images at a time
for Index (p.243) and Select & Delete (p.250).
There are no images that can be processed
using Digital Filter (p.265) or RAW
Development
(p.271) function.
Appears when you try to perform Save as
Manual WB (p.213), Resize (p.262), Cropping
(p.263), Digital Filter (p.265), or RAW
Development
(p.271) for images captured with
other cameras, or when you try to perform
Resize or Cropping for minimum file size
images.
The creation of an index print image failed.
(p.243)
Live View cannot be used because the
camera's internal temperature is too high.
Press the OK button and try using Live View
again when the camera has cooled down.

Advertisement

loading