How To Use The Manual Mode - NordicTrack C2150 24917.0 User Manual

HOW TO USE THE MANUAL MODE
1. insert the key into the console.
See HOW TO TURN ON THE POWER on page
16. Note: it may take a minute for the console
to be ready for use.
2. Select the main menu.
When you turn
on the power,
the main menu
should ap-
pear after the
console boots
up. Touch the
home button in
the lower-left
corner of the screen to return to the main menu at
any time.
MAp _RAII_ CO_ETE I_ACJ( SETAGOAL VI]3_O LOSEWEIGHT
3. Start the walking belt and adjust the speed.
Touch the Start button on the screen or press the
Start button on the console to start the walking
belt. You can also press the Manual button on the
console, and then touch the Resume button on
the screen. The walking belt will begin to move at
1 mph. As you exercise, change the speed of the
walking belt as desired by pressing the Speed in-
crease and decrease buttons. Each time you press
one of the buttons, the speed setting will change
by 0.1 mph; if you hold down the button, the speed
setting will change in increments of 0.5 mph.
If you press one of the numbered 1 Step Speed
buttons, the walking belt will gradually change
speed until it reaches the selected speed setting.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button.
4. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase and decrease buttons or one of
the numbered 1 Step Incline/Decline buttons. Each
time you press one of the buttons, the incline will
gradually change until it reaches the selected in-
cline setting.
Note: The first time you adjust the incline, you
must first calibrate the incline system (see step 4
on page 24). For your safety, as you adjust the
incline setting to negative levels, the maximum
speed of the treadmill will decrease at set
intervals.
5. Monitor your progress.
The console
offers sev-
eral display
modes. The
display mode
that you select
will determine
which workout
information is shown. To select the desired display
mode, simply flick or slide the screen (see page
16). You can also view additional information by
touching the red boxes on the screen.
As you walk or run on the treadmill, the screen can
show the following workout information:
• The incline level of the treadmill
• The elapsed time
• The time left (Note: The manual mode does not
have a time left countdown.)
• The approximate number of calories you have
burned
• The approximate number of calories burned per
hour
• The distance that you have walked or run
• The number of vertical feet you have climbed
• The speed of the walking belt
• A track representing 1/4 mile (400 m)
• Your pace in minutes per mile
Your current lap number
• Your heart rate (see step 6)
18