10. While a second person holds the Console (33)
near the Upright (5), connect the console wires
to the Wire Harness (60) and to the Pulse Wires
(34).
Insert the excess wire into the Console (33).
Tip: Avoid pinching
the wires. Attach the
Console (33) to the Upright (5) with four M4 x
16mm Screws (93).
10
_C
Avoid pinching
the wires
onsole Wires
93
11. Attach the Rear Upright Cover (24) to the
Upright (5) with two M4 x 16mm Round Head
Screws (106) and an M4 x 19mm Flat Head
Screw (117).
11
117
106
11